Skip to content

Service

Commercial overhead door repair in Springfield, MO

A shop door that will not open is a truck that cannot unload or a bay that cannot bill. Commercial doors are heavier and taller than residential ones and cycle far more often, and not every residential tech works on them.

On the form, choose the closest problem and say in the message that it is a commercial door, with the rough size and whether it is sectional or rolling steel. That gets the request to a company that does commercial work.

Four loading dock doors with dock seals on a warehouse wall

The kinds of door

  • Sectional steel doors. The same idea as a house door, in heavier steel and often insulated. Common on auto shops, fire stations, farm buildings and warehouses with ceiling room for the tracks.
  • Rolling steel doors. Interlocking slats that coil into a barrel above the opening. They need almost no ceiling space and take abuse, which is why storage units and loading docks use them.
  • Dock doors. Usually sectional, sized for trailers, and paired with a leveler and dock seals. They get hit by forklifts more than any other door in the building.
  • Counter shutters and grilles. Small rolling doors over service windows and storefronts.

What fails

Springs first, as on any door. A busy dock door can run 30 or 40 cycles a day, which would use up a standard 10,000-cycle spring in under a year. Commercial doors are fitted with high-cycle springs for that reason, commonly rated from 25,000 to 100,000 cycles, and replacing like for like matters. A cheaper spring on a busy door is a repeat call.

After springs come cables, rollers and the bottom section, which takes the forklift hits. On rolling steel doors, bent slats and damaged guides are the usual trouble. A slat that has been struck can jam the whole curtain in the guides.

The trade calls a commercial opener an operator. Operators fail at the limit switches, the brake, the clutch and the control board. Many commercial doors also have a sensing edge along the bottom or photo eyes, and a damaged edge will keep the door from closing under power.

Repair now, or plan it

Emergency calls cost more than planned ones in every trade. If your building has more than a couple of doors, ask about a planned maintenance visit once or twice a year: lubrication, spring and cable inspection, balance, operator limits and safety devices. Catching a frayed cable on a Tuesday morning is cheaper than a door down across a dock at shift change.

Keep a short log by each door with the door size, the spring size from the last replacement, and the operator model. It saves a trip when something breaks.

What it typically costs

Commercial pricing varies more than residential, because the doors do. As a loose guide, published figures put common sectional door repairs at $200 to $600 and rolling steel repairs at $300 to $900, with commercial springs running $250 to $800 or more each depending on size and cycle rating. Large doors, lift equipment and after-hours work push those up. Treat these as rough market figures and get a written quote for your door.

Safety around a damaged commercial door

Commercial doors: questions

Do residential garage door companies work on commercial doors?

Some do and some do not. Rolling steel doors and commercial operators take different parts and training. Say that the door is commercial when you send your request so it goes to the right company.

How often should a commercial door be serviced?

A common schedule is once a year for low-use doors and twice a year for busy dock and shop doors. Door and operator manufacturers publish their own intervals, so check the manual for yours.

Can a commercial door be fixed the same day?

It depends on the part. Common springs, cables and rollers are often on the truck. Large or unusual springs, slats and operator boards may have to be ordered. Ask when you describe the door.

What information should I have ready?

The door's width and height, whether it is sectional or rolling steel, whether it is manual, chain hoist or motor operated, and what it is doing. A photo of the spring and the operator nameplate helps.

Ask about commercial doors

Send the form and your request goes to a local garage door technician, who follows up with you directly.

  • Free to send, and no obligation to book
  • Goes to a technician who works in your town
  • Ask for the full price before any work starts
  • Repairs, openers and new doors

Request a quote

Tell us what the door is doing. A local garage door technician will follow up with you about the repair and the price.

It costs nothing to ask, and you decide whether to book once you have a price.

Get a free quote